Appro WH300 Guía de usuario descargar pdf (Pagina 12)

Rev. 2.0

1/23/06

Appro WH300 User’s Guide 11

3.2 Optional Items

Appro WH300 can be ordered with multiple optional components; depending on what options

were ordered, your kit may contain some or all of the following:

Part # Orderable

Qty

Description

22501-0001-00 0 or 1 3.5” 1.44MB Floppy Disk Drive

Varies 1 to 6 3.5” Hard Disk Drive (SATA, or SCSI)

Varies 0 or 1 5.25” CD/DVD ROM drive

Varies 0 or 1 5.25” Tape Back-up drive

Varies 0 or 1 PCI-Express Graphics Video Card

Varies 0 or 1 RAID Card

22302-0187-00 0 or 1 6x hot-swappable SCSI kit

22302-0186-00 0 or 1 6x hot-swappable SATA kit

3.3 Installing Peripherals

Appro WH300 should come pre-configured per your specific configuration, however Uniwide

understands that the owner may want to update or upgrade the product from time to time. These

instructions are meant to be helpful guidelines for those of you that wish to upgrade their

workstation. Uniwide recommends that the product be returned to uniwide for any significant

configuration changes to ensure continued warranty coverage. Please note that if the workstation

is opened by non-uniwide certified technician, it can void the product warranty. Please contact

Uniwide’s Technical Support prior to making any significant configuration change. Only

technically qualified personnel should integrate this assembly.

Peripherals

i) 5.25-inch Removable Media Drive Bays

The upper bays are designed for removable media peripherals. You can install up to

two half-height peripherals.

ii) 3.5-inch Hard Drive Bays

The chassis supports up to six drives depending on the power budget. The drives are

installed into a removable hard drive bay cage that is located beneath the floppy drive

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 36 37

Sin comentarios

Appro WH300 Guía de usuario Pagina 12